The Difference Between A Rotary Dehumidifier And A Solution Dehumidifier
Leave a message
There are many types of dehumidifiers. The main structure of the rotary dehumidifier is a continuously rotating honeycomb drying wheel. The drying wheel is the key component of the dehumidifier to absorb moisture. It is made of composite heat-resistant materials. It consists of a corrugated medium containing a hygroscopic agent.
This design has a compact structure and can provide a huge surface area for the moist air and the hygroscopic medium to be fully contacted. This greatly improves the dehumidification efficiency of the dehumidifier. The obvious feature and advantage of the rotary dehumidifier is that the relative humidity of the air can be treated to below 40%. The rotary dehumidifier should be equipped for the occasions where the air humidity requires a process.
The solution dehumidification air conditioning system is a new type of air conditioning product developed based on the active dehumidification air treatment technology that uses dehumidification solution as hygroscopic agent to adjust air humidity and water as refrigerant to adjust air temperature, which can provide fresh air operating conditions; its core is to use dehumidification Dehumidification above the dew point temperature is achieved through an innovative solution dehumidification method.
Advantages of solution dehumidifier (dehumidifier): When the small multi-function solution dehumidifier introduces fresh air, it exchanges heat with the indoor return air before the fresh air enters the cooling and dehumidifying core, so that most of the energy in the room can be recovered and the amount of entering refrigeration can be reduced. The fresh air enthalpy value of the dehumidifying core, thereby reducing the heat load of the compressor.
The humidity of the air can be adjusted to a suitable position without the need for a too low evaporating temperature. At the same time, the evaporation of the water in the solution is used to remove the condensing heat. Efficiency and energy saving.







