What Problems Should Be Paid Attention To in Actual Use Of Rotary Dehumidifiers?

The rotary dehumidifier has flexible options, complete functions, beautiful appearance, large dehumidification capacity and high efficiency, and can continuously provide low dew point dry air. It is widely used in cold storage, pharmaceuticals, lithium batteries, film workshops, glass laminations and other places, so what problems should be paid attention to in actual use? As follows:

1. When using the rotary dehumidifier, you should choose a space with a surrounding area of not less than 50cm, and it is forbidden to use it in sunlight and open air conditions, because the dehumidification effect is not obvious when used in a well-ventilated area. There is also a need to use it on a firm and flat ground, so that the rotary dehumidifier will not shake and make noise when it is in use.

2. In the case of non-professional technicians, it is forbidden to modify the machine without authorization, otherwise it will cause some machine damage and accidents.

3. It is forbidden to block the air inlet and outlet of the rotary dehumidifier to avoid damage to the machine and cause accidents; it is forbidden to insert fingers or sticks into the air outlet to cause accidents.

4. Because the structure of the rotary dehumidifier is different from that of the air conditioner, the temperature will rise a little when it is used in a small room. When using the rotary dehumidifier, there should be a dedicated power supply (pay attention to whether the voltage of the power supply is the same as dehumidifiers), and cannot use the same socket with other electrical appliances. It is forbidden to use the power cord plug as a switch, and the switch should be turned off in time when not in use.

The principle of the rotary dehumidifier is to use the original Swedish honeycomb type silica gel dehumidification rotary wheel, which is composed of a cylindrical turntable with a honeycomb structure, and then the ceramic silica gel crystals are fired into the dehumidification area and the box rotates. The air used for dehumidification passes through the dehumidification zone, and the water in the air is absorbed by the rotor to obtain dry air. The dehumidification area after absorbing the water is rotated according to the runner to the outside where the water in the runner is brought out by the heated air, and the runner is turned back to the dehumidification area after releasing the water. dry air.